So Cal Imports
FK-41 Performance Camshaft - Engle
FK-41 Performance Camshaft - Engle
The Engle FK-41 (FK41) is a performance camshaft for air-cooled VW Type 1 engines using 1.4:1 ratio rockers. Its combination of short duration and high valve lift promotes strong low-to-midrange torque and responsive throttle performance without requiring high engine speeds.
Particularly suited for trail buggies and recreational off-road engines where low-speed pulling power is more important than high-RPM horsepower. The FK-41's aggressive valve action requires careful valvetrain setup despite its relatively mild duration.
Performance & Application
-
Strong low-to-midrange torque and throttle response
-
Typical Operating Range: 1,000–5,000 RPM, depending on engine combination
-
Recommended Compression Ratio: 8.5:1–9.5:1 for naturally aspirated applications
-
Designed for 1.4:1 ratio rockers
Specifications
-
Advertised Duration: 269°
-
Duration @ .050": 240°
-
Cam Lift: .364"
-
Valve Lift @ 1.4:1: .510"
-
Lobe Center: 108°
Installation Notes
Requires compatible valve springs, new lifters, and reinforced rocker shaft assemblies. The aggressive lobe profile demands careful attention to rocker geometry, pushrod length, and spring pressure. Verify compression ratio, deck height, valve-to-piston clearance, coil bind, and retainer-to-guide clearance during assembly.
Share

